View NR4510UR_391690.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
PRELIMINARY DATA SHEET
NEC's O50 m InGaAs APD ROSA WITH INTERNAL PRE-AMPLIFIER NR4510UR FOR 2.5 GB/s APPLICATIONS
DESCRIPTION
NEC's NR4510UR is a InGaAs APD ROSA with an internal pre-amplifier in a receptacle type package designed for SFF/ SFP transceiver with LC duplex receptacle. This device is ideal as a receiver for Synchronous Digital Hierarchy (SDH) system, STM-16, ITU-T recommendations.
FEATURES
* INTERNAL PRE-AMPLIFIER * MINIMUM RECEIVER SENSITIVITY Pr = -33 dBm * WIDE OPERATING TEMPERATURE RANGE TC = -40 to +85C * 50 DIFFERENTIAL OUTPUT * SMALL PACKAGE 4.6 mm ROSA (Total length 12.0 mm MAX.) * BASED ON TELCORDIA RELIABILITY
California Eastern Laboratories
NR4510UR PACKAGE DIMENSIONS (UNIT:mm)
4.750.05
2.92
BOTTOM VIEW
4.0450.05 1.10.05 1 5 OPTICAL REFERENCE PLANE Vpd PD 2 3 4
6.990.2
11.50.5
1.30.15
0.550.05
3.4
0.30.1
PIN CONNECTIONS
VCC Vout + Vout -
4.750.1
( 4.75) 1.0
0.3 MAX.
12.50.5
5- 0.3 Pin No.
GND Function Vpd : PD cathode Vout + : Data output (+) Vout - : Data output (-) VCC : Pre-amplifer power supply (+3.3 V) GND : Case ground
0.8 MAX. 2.5 P.C.D 4.56
1 2 3 4 5
NR4510UR ORDERING INFORMATION
PART NUMBER NR4510UR-AZ* PACKAGE 4.6 mm ROSA
*NOTE: Please refer to the last page of this data sheet, "Compliance with EU Directives" for Pb-Free RoHS Compliance Infomation.
ABSOLUTE MAXIMUM RATINGS
PARAMETER Forward Current Reverse Current Supply Voltage Operating Case Temperature Storage Temperature Lead Soldering Temperature Relative Humidity (noncondensing) SYMBOL IF IR VCC TC Tstg Tsld RH RATINGS 10 1.5 4.5 -40 to +85 -40 to +85 350 (3 sec.) 85 UNIT mA mA V C C C %
ELECTRO-OPTICAL CHARACTERISTICS
PARAMETER Reverse Break Down Voltage Temperature Coefficient of Reverse Breakdown Voltage Dark Current Minimum Receiver Sensitivity SYMBOL VBR ID Pr
(TC = -40 to +85C, VCC = 3.3 V, = 1.31 m, 1.55 m, unless otherwise specified)
CONDITIONS ID = 100 A MIN. 40 0.09 VR = 0.9 VBR, TC = 85C 2.48832 Gb/s, BER = 10 , PRBS = 223-1, ER = 10 dB, = 1.31 m, NRZ, AC-coupled, Mopt
-10
TYP. 60
MAX. 70 0.15 500
UNIT V %/C nA dBm
-33
-30
Maximum Optical Input Power
Povl
2.48832 Gb/s, BER = 10-10, PRBS = 223-1, ER = 10 dB, = 1.31 m, NRZ, AC-coupled, M =3 M = 1, = 1.31 m M = 1, = 1.55 m
-6
-5
dBm
Sensitivity
S
0.80 0.88 1.6 27 1.05 3.15 1.4 3.3 3.45 45 1.9
A/W
Cut-off Frequency Optical Return Loss Transimpedance Supply Voltage Supply Current
fC ORL Zt VCC ICC
AC-coupled, RL = 50 , M = 10, -3 dB Ref to 100 MHz SMF f = 100 MHz, 50 single-ended, AC-coupled 50 load
GHz dB k V mA
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
04/19/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of NR4510UR

	To Download NR4510UR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .